| 1. | Adhesives - peel test for a flexible - bonded - to - rigid test specimen assembly - 90 peel
胶粘剂.软料与硬料粘合试样组件剥离试验. 90剥离 |
| 2. | Adhesives - peel test for a flexible - bonded - to - rigid test specimen assembly - 180 peel
胶粘剂.软料与硬料粘合试样组件剥离试验. 180剥离 |
| 3. | Adhesives . peel test for a flexible - bonded - to - rigid test specimen assembly . part 1 : 90 degrees peel
胶粘剂.软料与硬料粘合试样组件剥离试验.第1部分: 90剥离 |
| 4. | Adhesives . peel test for a flexible - bonded - to - rigid test specimen assembly . part 2 : 180 degrees peel
胶粘剂.软料与硬料粘合试样组件剥离试验.第2部分: 180剥离 |
| 5. | Adhesives ; peel test for a flexible - bonded - to - rigid test specimen assembly ; part 1 : 90 peel iso 8510 - 1 : 1990 ; german version en 28510 - 1 : 1993
粘合剂.软质与硬质粘合试样组件的剥离试验.第1部分: 9 |
| 6. | Adhesives ; peel test for a flexible - bonded - to - rigid test specimen assembly ; part 2 : 180 peel iso 8510 - 2 : 1990 ; german version en 28510 - 2 : 1993
粘合剂.软质与硬质粘合试样组件的剥离试验.第2部分: 1 |
| 7. | And the displacement control of the leaf spring center was transferred to the displacement at load point . then after the load step options configuration , the leaf spring stress circulation under cycle loadings was calculated . the model was validated by the result compare between the rigid extracted from the simulation results and the one out of the rigid test of the leaf spring
使用加载头和簧片的接触行为来模拟加载状况，并将对簧片中心的变形控制转换为对加载点的位移约束，然后利用载荷步选项配置完成一个载荷循环，由此计算出加载阶段下钢板弹簧内部的应力循环。 |
